36.8 mhz saw filter 5.7 mhz bandwidth part number SF0036BA01033T spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 5082516400 fax 5082516401 www.spectrummicrowave.com dsSF0036BA01033T rev x2 11feb11 page 1 of 3 description 36.8 mhz saw bandpass filter with 5.75 mhz bandwidt h for vsb system b/gif applications. 35.05 x 20.57 mm dip package, 24 pins. rohs compliant . typical performance s11 (31.841.8 mhz) s22 (31.841.8 mhz) amp 10 db/div amp 1 db/div phase 5 deg/div delay 50 ns/div center = 36.8 mhz, 1 mhz/div (801 points)
36.8 mhz saw filter 5.7 mhz bandwidth part number SF0036BA01033T spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 5082516400 fax 5082516401 www.spectrummicrowave.com dsSF0036BA01033T rev x2 11feb11 page 2 of 3 specification parameter min typ max units f_visual 38.9 mhz f_color 34.5 mhz f_audio 33.4 mhz center frequency ( nominal) 36 mhz insertion loss 27.5 29 db 1 db lower band edge 33.91 33.95 mhz 1 db upper band edge 39.65 39.76 mhz passband ripple (34.039.4 mhz) 0.45 0.5 db pp phase deviation (33.939.65 mhz) 3 5 deg pp gd ripple (33.939.65 mhz) 40 50 ns pp rejection (2032 mhz) 50 55 db rejection at 33.4 mhz 40 45 db rejection at 40.15 mhz 40 45 db rejection (40.455.0 mhz) 50 55 db 2t k factor 0.5 % pulse to bar ratio 1.5 % absolute delay 4.5 us ambient temperature 37 40 43 oc temperature coefficient 72 ppm/oc source/load impedance 50 substrate material 128 lithium niobate maximum ratings parameter min max units storage temperature range 40 85 ?c input power level +13 dbm matching circuit notes: external matching components are not required. device is intended to operate in a 50 single ended system. input 50 w single ended output 50 w single ended 3 15 22 10 ret ret
36.8 mhz saw filter 5.7 mhz bandwidth part number SF0036BA01033T spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 5082516400 fax 5082516401 www.spectrummicrowave.com dsSF0036BA01033T rev x2 11feb11 page 3 of 3 package outline units: mm tolerances are typically 0.15 mm except where indicated. pin configuration: input: 3 input return: 22 output: 15 output return: 10 ground: all other pads all specifications are believed to be accurate and reliable. however, spectrum microwave reserves the right to make changes without notice. ? 2011 all rights reserved. iso 9001 registered smi ba01033t yyddd date code (yy=year, ddd=day) pin 1 identifier
|
